Boiler room for connection to heat pump and collectors
Sigma’s new boilers are designed for connection to heat pumps and collectors, in case collectors are also installed, so that the heat pump is not overloaded during the summer months. Our range, also in this product, currently ranges from 200L up to 500L.
Exchanger S1 input / output | 1½ G |
Exchanger S2 input / output | ¾ G |
Maximum recommended collector
area of solar panels S1 |
3 m2 |
Exchanger surface S1 | 2,6 m2 |
Exchanger surface S2 | 1,2 m2 |
Exchanger power (Τheat pump = 80° ΔT water use: 15° / 60° C) |
24 kw 1000 l/h |
Exchanger power (Τheat pump = 80° ΔT water use: 15° / 60° C) |
60 kw 2000 l/h |
Electrical resistance power | 3,5 kw |
Cold water inlet | 1″ G |
Hot water outlet | 1″ G |
Recirculation | 1″ G |
Weight | 147 kg |
Height | 1545 mm |
Diameter | 600 mm |
Insulation thickness | 55 mm |
Exchanger S1 input / output | 1½ G |
Exchanger S2 input / output | ¾ G |
Maximum recommended collector surface of solar collectors S1 | 4 m2 |
Exchanger surface S1 | 3,6 m2 |
Exchanger surface S2 | 2,2 m2 |
Exchanger power (Τheat pump = 80° ΔT water use: 15° / 60° C) |
40 kw 1000 l/h |
Exchanger power (Τheat pump = 80° ΔT water use: 15° / 60° C) |
100 kw 2000 l/h |
Power of electrical resistance | 3,5 kw |
Cold water inlet | 1″ G |
Hot water outlet | 1″ G |
Recirculation | 1″ G |
Weight | 192 kg |
Height | 1620 mm |
Diameter | 630 mm |
Insulation thickness | 55 mm |
Exchanger S1 input / output | 1½ G |
Exchanger S2 input / output | ¾ G |
Maximum recommended collector area of solar panels S1 | 6 m2 |
Exchanger surface S1 | 4,2 m2 |
Exchanger surface S2 | 2,6 m2 |
Exchanger power (Τheat pump = 80° ΔT water use: 15° / 60° C) |
50 kw 1000 l/h |
Exchanger power (Τheat pump = 80° ΔT water use: 15° / 60° C) |
125 kw 2000 l/h |
Electrical resistance power | 3,5 kw |
Cold water inlet | 1″ G |
Hot water outlet | 1″ G |
Recirculation | 1″ G |
Weight | 240 kg |
Height | 1700 mm |
Diameter | 750 mm |
Insulation thickness | 55 mm |